"and what I can say is all the other stand-mount speaker manufacturers better watch out, the V3Ms sound like they should cost double or triple the $2000 they sell for"
Kemper Holt, www.EnjoyTheMusic.com
The V3M is the next step up in the V Stand Mount Series incorporating a 6.5" mid-woofer and G3N pure aluminum ribbon tweeter. As in all the VM series, the enclosure is a highly complex sloped and truncated design to minimize internal reflections, increase the structural integrity and acoustically align the components. This moderately sized speaker is capable of impressive low frequency definition, wide bandwidth, overall smoothness and surprising output for its price point. In addition to the impressively finished cabinet are the matching high gloss PE stands. 4 x 18mm gold plated copper core connectors allow for single or bi-wiring. Best suited for small to moderately sized listening rooms. Available in high gloss Cherry, Figured Maple or Rosewood finish.
-
Design: 2-way vented-box
-
Frequency Response: 45Hz-40kHz
-
Sensitivity (2.83V/1m): 88dB
-
Impedance: 8 ohms (minimum 6.4 ohms)
-
Power Requirement: 50-200W recommended
-
Tweeter: Model: G3N. Purified aluminum ribbon tweeter (LWT):110mm × 14.5mm × 0.01mm. High power handling, high output, shielded design, with field-replaceable diaphragm.
-
Mid-woofer: Model: AC165AVM/50CK, 1×165mm (6.5″). Aluminum frame, composite cone of non-woven carbon fiber and Kevlar, 50mm (2″) copper clad aluminum voice coil with flat wire, utilizing a specialized magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.
-
Crossover Frequency: 2200Hz
-
Crossover’s Attenuation Slope: Woofer -12dB, Tweeter -18dB
-
Crossover Components: M-Cap Supreme MKP capacitors are used for the tweeter with Aurum Cantus MKP capacitors used for the mid-woofer. Highly purified OFC inductors and military grade metal oxide film resistors.
-
Connective Cable: Teflon insulated OCC cable
-
Damping Materials: Polyester fiber and PU foam
-
Connections: 4 x 18mm gold-plated copper connectors w/ Bi-wiring
-
Cabinet Material: High quality MDF
-
Finish: Rosewood PE high gloss, Figured Maple PE high gloss, or Cherry PE high gloss.
-
Dimensions (HWD): 410mm × 225mm × 359mm (16.14″×8.86″×14.13″).
-
Net Weight: 16kgs/ea. (35.27lb/ea.)
-
Gross Weight: 50kgs/pair (110.24lb/pair)
-
Shipping Volume: 0.214m3/pair